Product Introduction

    This is a compact, high-performance dual-channel carbon brush slip ring manufactured by Ingiant Technology. Its core function is to realize the non-twisted, continuous and reliable transmission of two independent electrical signals or low-power electric energy between rotating and fixed components. Precisely engineered, this product adopts a classic and reliable contact structure of brass collector rings and carbon brushes, and is suitable for various electromechanical devices requiring 360° continuous rotation.

Key Performance and Specification Parameters

1. Model Information

Component Name: Carbon Brush Slip RingModel: CBDHK050-2

2. Core Structural Parameters

l Number of Circuits: 2 (corresponding to “2X BRASS COLLECTOR RINGS”)

l Mounting Method: Flange-mounted, fixed via two M5 threaded mounting holes

l Mounting Hole Specification: 2 holes of Ø4.2, tapped with M5 threads on the back

l Collector Ring (Rotor Part): Composed of two brass collector rings with black cast insulator as the insulating component

l Electrical Connection Method: The collector ring end is equipped with brazed brass studs (2X M5 BRASS STUDS & NUTS BRAZED INTO COLLECTOR RINGS) for convenient wire connection; the carbon brush end (fixed end, not detailed in the drawing) is connected via a PCB board, marked with model “64 PCB”

3. Key Mechanical Dimensions

•  Outer Diameter: Ø80mm
•  Locating Outer Diameter of Mounting Flange: Ø50 H7 (precision fit tolerance)
•  Total Axial Thickness of Product: 24mm (distance from the outer end face of the flange to the wiring end face of the collector ring)
•  Collector Ring Arrangement: The center distance between the two collector rings is 36mm
•  Wiring Stud Position: Two M5 wiring studs are distributed at a 120° angle

4. Design Standards and Tolerances

Linear Dimension Tolerance: Complies with GB/T 1804-m standard, ensuring the interchangeability and assembly accuracy of parts

Typical Application Scenarios

• Industrial Automation: Signal and power transmission for rotary worktables, robotic arm joints and indexing plates.
• Testing Equipment: Instruments requiring continuous rotational testing such as centrifuges and turntables.
• Display and Entertainment Equipment: Revolving billboards, exhibition stands and stage lighting equipment.
• Small-Scale Wind Power/Solar Tracking Systems: For transmitting sensor signals or control power supply.